Part II. Multiple Choice Questions
1. Which of the following ones is NOT a solution?
(1) air (2)
coke (3) saline (4) blood (5) alloy
2. Absolute zero is (1) –273 K (2) –273 °F (3) –273 °C.
3. The ceramic tiles on the space shuttle cannot be heated up
easily because they have ______ heat capacity.
(1) very high
(2) very low (3) nothing to do with heat capacity!
4. After an observation of a phenomenon, a (1) scientific law, (2) theory, (3) hypothesis, (4) proposal can be made and tested by experiments.
5. Which of the followings is a physical change:
(1) cooking a steak,
(2) burning oil, (3) changing color of leaves, (4) sugar
in boiling water, (5) none of above.
6. Which statement is true:
(1) An element can
be easily converted to another element by simple chemical reactions.
(2) Heat dark brown
iodine solid in the absence of oxygen turns the solid into a purple gas.
This is a chemical change because of the change of color.
(3) Passing electricity
through water causes the formation of gas bubbles even though the temperature
stays below the boiling point of water. This is a chemical change.
(4) All of the above
are true.
7. Dry ice (solid CO2) characteristically changes directly
from the solid state to the gaseous state. This physical change is
called
(1) evaporation,
(2) vaporization, (3) gasification, (4) sublimation, (5) all
of the above.
8. Which of the following is the highest temperature?
(1) 450 K, (2) 450
°C, (3) 450 °F, (4) All represent the same temperature, (5) Not
comparable because of their different units.
9. The boiling point of benzene is 80.0 °C. Five measurements
of the point are obtained as 82.5, 81.5, 80.1, 78.5, and 77.5 °C.
These measurements have
(1) good accuracy
good precision. (2) good accuracy and poor precision.
(3) poor accuracy
and good precision. (4) poor accuracy and poor precision.
10. Which one is the lowest temperature?
(1) 100 °C
(2) 100 °F (3) 100 K (4) Not comparable!
11. The number of the significant figures of the measurement 2.0200
x 10-2 g is:
(1) 3, (2) 1,
(3) 5, (4) 8, (5) cannot determine.
12. The measurement 2.0200 x 10-2 g in decimal notation
is
(1) 2.020000 g,
(2) 202.00 g, (3) 0.0202 g, (4) 0.020200 g.
13. Which of the followings is scientifically correct?
(1) 12.4 mg + 3.54 mg +
21 mg = 36.94 mg,
(2) 2.36 m x 8.4 m = 19.824
m2,
(3) 3.200 m x 1.22 = 3.904
m,
(4) all of 1-3,
(5) none of 1-3.
14. A unit of density can be
(1) g/L, (2) pound/L
(3) kg/gallon, (4) all of them.
15. How many of the following measurements have 3 significant
figures, 14.03 g, 0.017 km, 5.30 x 102 mL, 6.780 mg, 0.171 L?
(1) 1, (2) 2,
(3) 3, (4) 4, (5) 5.
16. How much heat is required to heat 225 g water from 25 °C
to 100 °C? (The specific heat capacity of water is 1 cal/g °C.)
(1) 3.0 cal, (2) 5.6
x 103 cal, (3) 1.7 x 104 cal, (4) 0.33
cal, (5) none of above.
17. To raise the temperature of an amount of water by 25.0 °C
requires 0.85 kcal. What is the mass of the water?
(1) 34 kg, (2) 34.0
kg, (3) 34 g, (4), 34.0 g, (5) 34.00 g.
18. Which of the following items does not contain heat (calories)?
(1) skim milk,
(2) apple, (3) carrot, (4) non-sugar cookies, (5) All
of the above contain heat!
19. When you mix 5.0 g of water at 20 °C with 10 g of water
at 50 °C, the final temperature is
(1) 30, (2)
35, (3) 40, (4) 45 °C. (5) cannot be determined!
20. You were testing three materials for heat insulation.
You gave same amount of heat to all 3 materials. You found that 1.0
g of material A raised temperature by 10 °C, 1.5 g material B
raised 20 °C, and 2.0 g material C raised 15 °C. Which one
is a better heat insulator?
(1) A, (2) B,
(3) C, (4) They are the same! (5) Cannot determine!
21. Which is a chemical change?
(1) melting of smow,
(2) making tea from a tea bag, (3) evaporating ocean
water to obtain salt, (4) rusting of iron, (5)
all of the above.
22. How many ounces are in 2.86 kg? (1 kg = 2.205 lb and 1 lb = 16 oz)
(1) 0.081 oz,
(2) 20.8 oz, (3) 101 oz, (4) 12.3 oz,
(5) none of above.
23. The density of ethanol is about 0.8 g/mL. The mass of 20 L
ethanol is
(1) 16 g,
(2) 0.04 kg, (3) 16 kg, (4) 25 kg,
(5) none of above.
24. Which is not a form of energy?
(1) electricity,
(2) heat, (3) light,
(4) temperature, (5) all of them
ARE forms of energy.
25. How many calories are required to heat 755 g of iron from 23 °C
to 175 °C if the specific heat capacity is 0.11 cal/(g °C)?
(1) 130 cal, (2) 1430
cal, (3) 56 cal, (4) 13 kcal.
** This question can be changed into several
different questions by changing the mass, the temperature, or/and the material.
26. The specific heat of aluminum is 0.22 cal/(g °C). If 300
cal heat is added to 10.0 g of Al at 25 °C, what will the final temperature
of this Al be?
(1) 208 °C, (2)
161 °C, (3) 136 °C, (4) 55 °C, (5) none of above.
** This question can be changed into several
different questions by changing the mass, the temperature, or/and the material.
** Which one is a better heat conductor, Fe or
Al?
27. When a same amount of heat is given to 1 g and 10 g of Fe
at a same temperature, which one has higher final temperature?
(1) 1 g Fe, (2) 10
g Fe, (3) same final temperature, (4) Cannot compare.
28. A breakfast cereal contains 110 nutritionist's cal/oz. How
much is this in cal/g if 1 oz = 28.35 g?
(1) 3880, (2) 3118,
(3) 3.118, (4) 3.88 cal/g.
29. If the recommended dosage of a prescribed drug is 2 mg/kg of body
weight, the amount of the drug that should be administered to a 12 lb infant
is (1 lb = 0.453 kg)
(1) 11, (2) 4, (3)
3, (4) 22 mg.
30. The "blue ice" utilized for keeping things cool in a cooler should
have ________ specific heat capacity because it can absorb a lot of heat
before it needs to be replaced.
(1) large,
(2) small, (3) Does not matter.
** Does the blue ice "release cold" to the items in the cooler?
31. What is the maximum number of electrons that can be filled into
the second principal energy level of an atom?
(1) 4
(2) 6 (3) 8 (4) 10 (5) 18
32. What is the maximum number of electrons that can be filled into
the third principal energy level of an atom?
(1) 4
(2) 6 (3) 8 (4) 10 (5) 18
33. The maximum number of electrons and number of orbitals, respectively,
in the 4d energy sublevel are
(1) 6 and 3.
(2) 10 and 5. (3) 2 and 1. (4) 4 and 2. (5) 18 and 9.
34. Isotopes of an element
(1) contain the same number
of neutrons. (2) have different nuclear charges. (3) must have the same
atomic number. (4) must have the same mass.
35. The number 60 in cobalt-60 represents
(1) the atomic number.
(2) the mass number. (3) the number of the protons. (4) the sum of the
protons and electrons. (5) the number of the neutrons.
36. The first ionization energy of sodium is 118.5 kcal/mol.
The second ionization energy compared with the first ionization energy
is most probably
(1) about the same.
(2) about double. (3) much lower. (4) much higher.
37. An orbital is best described
as
(1) an electron's
path. (2) a probability region of finding electrons (3) an
energy level. (4) an energy sublevel.
38. The nucleus of an atom is
(1) positively
charged and has a high density.
(2) positively
charged and has a low density.
(3) negatively
charged and has a high density.
(4) negatively
charged and has a low density.
39. We would expect the electron configuration of oxygen to show ______
(how many?) unpaired electrons in its p orbitals according to the Hund's
rule.
(1) zero (2)
one (3) two (4) three
40. Which one has the electron configuration 1s2 2s2
2p6?
(1) Na+
(2) Mg2+ (3) Ne (4) F– (5) All of them!
What
is the number of electrons for each of the above atom/ion?
41. Which element has the smallest first ionization energy?
(1) P (2) Si
(3) Al (4) Mg (5) Na
42. Which element has the lowest third ionization energy?
(1) P (2) Si
(3) Al (4) Mg (5) Na
43. Which element has the largest atomic radius?
(1) F (2) Cl
(3) Br (4) I (5) At
**For more "Which element" questions, please
refer to the book!
For example:
The element ___ is widely used in the manufacture of electronic chips.
(P. 99)
The element ___ can be found in DNA, bones, and teeth. The element
itself is very sensitive to oxygen. (P. 99)
The element ___ is toxic when it is taken into the body at certain
level, but is an essential trace element for our health which can lower
the risk of heart attack. (P. 101)
The metal ___ is found in vitamin B12.
(P. 103)
44. When Mg reacts with oxygen gas, you expect the formation of
(1) MgO
(2) MgO2 (3) Mg2O (4) Mg2O3
45. A metal that is an ingredient of the alloy used as implant material:
(1) Ag (2) Cu
(3) Au (4) Ti (5) Hg
46. The element in hemoglobin that is responsible of oxygen binding
is
(1) Fe (2) Cu
(3) Ni (4) Zn (5) Co
**For more "what metal is in what protein/enzyme"
questions, please refer to the lecture notes.
47. We would expect the electron configuration of nitrogen to show ______
(how many?) unpaired electrons in its p orbitals according to the Hund's
rule.
(1) zero
(2) one (3) two (4) three (5) four
48. Which one has the electron configuration 1s2 2s2 2p6?
(1) Na+
(2) Mg2+ (3) Ne (4) F–
(5) All of them!
**More electronconfiguration questions:
Write the electron configuration of the followings:
(Count the number of electrons for each atom
or ion! Please refer to the lecture note for these examples.)
(a) Na; (b) Na+;
(c) O2–; (d) Fe2+
49. Which element has the lowest third ionization energy?
(1) P
(2) Si (3) Al (4) Mg (5)
Na
50. A metal that is an ingredient of the alloy used as implant material:
(1) Ag
(2) Cu (3) Au (4) Ti (5) Hg
51. Which element has the smallest second ionization energy? (How
about the first and third IE?)
(1) P
(2) Si (3) Al (4) Mg (5)
Na
52. Isotopes of an element
(1) contain the same
number of neutrons. (2) have different nuclear charges.
(3) must have the
same atomic number. (4) must have the same mass.
53. The number 60 in cobalt-60 represents
(1) the atomic number. (2) the mass number.
(3) the number of the protons.
(4) the sum of the protons and electrons.
(5) the number of the neutrons.
54. The number of neutron in 146C is
(1) 14, (2) 6, (3) 7, (4)
8 (5) 20.
55. The number of neutron in hydrogen atom 11H
is
(1) 1, (2) 2, (3) 3, (4)
0, (5) Cannot be determined!
56. The most abundant element in terms of number of atoms in our body
is
(1) carbon (2) water (3) sodium (4) hydrogen (5) oxygen
57. If an isotope undergoes beta-particle emission,
(1) the mass number changes.
(2) the atomic number changes.
(3) the number of neutrons remains the same.
(4) the number of electrons remains the same.
(5) the number of protons remains the same.
58. What is the atom generated after an alpha particle is emitted from
23892 U?
(1) 23792 U (2)23492
U (3) 23790 Th (4) 23490
Th
59. How much does 100 g I-131 remain after 100 days? I-131 has
t1/2 = 8 days.
(1) 1 g (2) 8 g (3) 0.0173 g (4) 12.5 g
60. C-14 decays to produce N-14. What is emitted?
(1) alpha particle (2) beta particle (3) hydrogen atom
(4) gamma ray
61. Upon radiation, _______ is eventually generated which can cause
damages of proteins and nucleic acids.
(1) alpha particle (2) beta particle (3) hydrogen atom
(4) hydroxyl radical
62. The unit that is used for the rate of radiation decay, i.e., a measure
of the number of atoms that decay per second.
(1) rad (2) rem (3) curie (Ci) (4) roentgen
(R)
**What are the definitions for the other units?
63. 23892U decays all the way to the stable 20682Pb.
How many alpha decays are associated with this nuclear reaction?
(1) 4 (2) 8 (3) 32 (4) Cannot be determined!
64. The electron dot structure for the hydroxide ion OH– is____________.
65. Which one has the electron configuration 1s2 2s2
2p6?
(1) Na+ (2) Mg2+ (3) Ne
(4) F– (5) All of them!
66. The IIIA group of elements have ______ valence electrons.
(1) 1 (2) 2 (3) 3 (4) 4 (5) 5
67. The radioactive gas 22286Rn decays to form
21884Po, and emits _____.
(1) an alpha particle. (2) a beta particle. (3) a positron.
68. After how many half-lives can a radioactive isotope of 64 g decay
to only 2 g?
(1) 1 (2) 2 (3) 3 (4) 4 (5) 5
69. The most penetrating radiation is
(1) a radiation (2) b
radiation (3) g radiation (4) X-ray
radiation
70. Which compound is not an ionic compound?
(1) NaCl (2) CaCl2 (3) LiO (4) CCl4
(5) Ca(CO3), calcium carbonate